High precision CNC Vertical lathes in factory-VT650

1.Advanced technologies,computerized module design; 2.High precision,speed,stability; 3.One-time clamp; 4.Less floor space. Features 

This machine uses the domestic and foreign advanced technologies, computerized module design with brand-new structure. The machine needn’t to wait for warming, which can run once start up. The precision and stability is good, cost performance is high, does not take up much area.  It is easy to install it and save labor force. One-time to clamp, that can realize most or all of processing requirements of complex parts, especially to process multispecies and medium and low volume.

 

Patent number: 200920093170.3 

 

Technical parameter

 

Type		VT650
Capability	Max. swing dia.        mm	Φ800
	Max. cutting dia.       mm	Φ650
	Max. cutting height     mm	500
	Max. bearing weight     kg	1500
Spindle	Motor power            kw	11kw/25hz
	Torque force            nm	280(belt)/1680(gear)
	Drive ratio  (belt)	1:2
	(gear box)	1:12
	Range of rotation speed(belt)	30-1500
	(gear box)	5-300
	Front bearing bore dia.   mm	Φ160
	Type of spindle ends	A2-11
	Chuck dia.              mm	Φ500
Feed	X-axis travel            mm	-50/450
	Z-axis travel           mm	510
	X/Z rapid traverse speed   m/min	15/18
	Spindle end to tool end    mm	570 50
Accuracy	Position accuracy          mm	±0.005
	Repeatability position accuracy  mm	±0.003
Tool post	Type	8/12 stations hydraulic turret
	Center height               mm	125
	Dia. of edge                mm	420
	External dia. Of tool mm	32×32
	Standard size of boring tool     mm	Φ40
Power	Power                  v	380V50HZ
	Total power            kw	19
Outlook	L          mm	1900
	W          mm	2300
	H          mm	2800
Weight	kg	9000

 

Physical Features

Lathe bed design is rib plate multi-sections changing construction. It adopts anti-seismic filling material inside the lathe bed, it can increase the rigidity and aseismicity of lathe.

X guide adopts multi-guide exceed locating mode, it can increase the rigidity of lathe and the precision is high.Spindle bear adopts two-front and four-back structure, it can increase the rigidity and anti-seismicity of spindle, the precision is high.The diameter of lead screw is increased 1.5 to 2 times, so that it increases the driving force and enhances cutting rigidity.Lathe adopts advanced pre-positive chip removal, it doesn’t destroy the whole rigidity of lathe. You can also add automatic chip removal device.Lathe adopts fully enclosure hood, it is very elegant.It adopts automatic lubrication device without maintenance.Applied range

To process various plates, shells and minor axis parts. Such as gear, bear, brake disc, flywheel, wheel hub, flange plate, valve, pump body.,etc. 

configuration

Standard configurations

GSK 980 CNC system

Fully enclosure hood

Three-color alarm lamp

Frequency conversion spindle motor

Motor-driven cutter/ hydraulic cutter

Air chuck/ hydraulic chuck

Chip removal water box

Automatic lubrication system

Heat exchanger

Electronic hand wheel

Tools & tool box

High precision CNC Vertical lathes in factory-VT650